S-09 · ALARM & PERIMETER INTRUSION
Perimeter alarm and intrusion detection.
A fence delays someone. A perimeter alarm tells the guardhouse where, and the cameras tell it whether the alarm is real.
A perimeter intrusion system watches a site's boundary in zones and tells the guardhouse which stretch was crossed, climbed or cut, with the camera that covers it. Occhio Tec designs, installs and maintains alarm handling and perimeter intrusion for high-rise and commercial buildings, alongside the CCTV that confirms an alarm.

What a perimeter intrusion system is
A perimeter intrusion detection system (PIDS) watches the boundary of a site and raises an alarm when someone crosses, climbs or cuts it. The boundary is divided into zones, so the alarm says which stretch of fence, and the alarm handling side puts it in front of the guard with the camera that covers that zone.
It is not CCTV on its own. Cameras record; detection decides when to look. Most buildings need both, joined, which is why the two are specified together. The CCTV side is on CCTV for condominiums.
The parts of a perimeter system
- Detection on or beside the fenceBOUNDARY
- Zones, each a length of the boundaryPER ZONE
- Alarm panel or energiserCABINET
- Annunciator or alarm screenGUARDHOUSE
- Cameras covering each zonePER ZONE
- Cabling back to the guardhouseSHARED
- Backup powerSHARED
The kinds of detection
Detection can sit on the fence itself (pulsed wires, sensors that feel the fence move) or beside it (beams between posts). Each kind behaves differently in rain, wind and vegetation, and each is maintained differently. How these choices play out on a condominium boundary is set out in condominium perimeter fence security.
False alarms, and the alarm nobody answers
A perimeter system fails in two ways. It can stop detecting, which nobody notices; or it can alarm so often that the guards stop responding, which everyone notices and nobody fixes. Both are maintenance problems: zones that are tested, vegetation kept off the fence, and an alarm record that someone reads. Patrols that check the boundary are covered in guard patrol systems.
Our part
Alarm handling and perimeter intrusion are among the systems we design, install and maintain for high-rise and commercial buildings, alongside the CCTV that confirms an alarm. We take over systems another contractor installed, across the brands we supply, service and support.
What to ask for in a quotation
- The boundary drawn as zones, with the length of each.
- The detection type for each zone, and why it suits that stretch.
- Which camera covers each zone, and how the alarm brings it up for the guard.
- How each zone is tested at handover and at every maintenance visit.
- Backup power for the panel and the detection.
- Maintenance after handover, priced separately: see maintenance and takeover.
Next step
A site survey walks the boundary, marks the zones and checks what is already there, so the quotation is written against the site rather than a catalogue.
Questions committees ask about perimeter alarms
Q-01What is a perimeter intrusion detection system?
Detection along the boundary, divided into zones, that tells the guardhouse which stretch of fence was crossed, climbed or cut, with the camera that covers it.
Q-02Why does our fence alarm keep going off?
Weather, vegetation on the fence, or detection that does not suit that stretch can all cause it. Zones need testing and the fence line needs clearing as part of maintenance.
Q-03Do you maintain a perimeter system another contractor installed?
Yes. Occhio Tec takes over and maintains systems another contractor installed.
Q-04Does a perimeter alarm replace CCTV?
No. Detection decides when to look; CCTV records and confirms. The two work together.